With the many customers now choosing to purchase there Nutanix cluster and go with the purpose build AHV hyper-visor at no extra costs I am tasked with putting together migration plans from ESXi , Hyper-V etc.. We have a number of option’s depending if the customer can experience downtime or not and if there are to many costs for live migration.
In this blog I want to walk you through how easy Nutanix have made this process with improved image service available in 5.03.
When I asked this question this week if I could complete this task there was various information out there and not all of it was positive, some complex workarounds seemed to be workable. I’m glad to report I completed several migrations this week and created a simplified plan for the customer, which I thought I would share in a blog.
The process does require down time and depending on the size of the VM for the length of time. I was averaging a 100GB VM completely converted in approx one hour with the new VM running.
Step 1 – Create a migration container on AHV, this is only required for the duration of the migration.
Step 2 – We need to grant your Server Hosts access to the nutanix container you just created.
Select Filesystem Whitelists
You need to pick individual hosts or a subnet of hosts that you want to access the container
For single IP enter x.x.x.x/x.x.x.x
Step 3 – make sure you have no Hyper-V snapshots hanging around.
Step 4 – Install Nutanix VirtIO drivers
Select and install the Nutanix-VirtIO drivers, please check Nutanix.com for latest drivers
Select Install and complete installation.
Step 5 – Check the location where the VHD /VHDX of the VM is stored from Hyper-V manager
Note: Make sure you delete any snapshots from Hyper-V manager as the image service will not convert the VHD/VHDX file as the snap needs to be merged so that all data is in the one file.
Step 6 – Shutdown the VM
Step 7 – RDP to the Hyper-V host
Step 9 – Map to the file share of the container \\cluster_name\container_name
Step 10 – Copy the VHD / VHDX file to the container using copy and past function
Step 11 – Use Image service to trans-code the file
Select Image Configuration
Select Upload Image
Enter a Name
Select IMAGE TYPE = DISK
Select a container not the migration container
Enter IMAGE Source =nfs://127.0.0.1/migration/VM_name.vhd or vhdx
When completed you will have server name and disk state will be active.
Step 12 – Create a new VM as normal, at this point you can up the memory and CPU count if required as you will need to re register windows. When it comes to adding the disk see below
TYPE = DISK
OPERATION = Clone from image service
BUS TYPE = SCSI
IMAGE = the image you just created from image service
Step 13 – Start the VM
Step 14 – Remove the Hyper-V NIC and assign correct IP
If you have multiple disks for a VM you need to do each one in turn and attach them n the correct order